Main menu
-
Catalog
Your cart
Exclusive
Get 5% Off Your First Order
Save big on your tires this fall when you sign up for 5% off your first order.
Get 5% Off Your First Order
Automotive tools
【More than car jump starter】: The A30 jump starter battery pack can also be used as 74 Wh power bank with 2 USB outputs to charge your smartphone, or other USB devices at the same time. The 400 lumen built-in LED light with 3 modes: Flashlight, Strobe, and SOS, which is helpful in the dark or in emergency.
【QC3.0 Fast Charging】: The portable jump starter has dual USB ports for charging (5V/2.4A) & (5V/3A 9V/2A 12V/1.5A), and with QC3.0 output 2 (5-12V) (75% faster than standard chargers). This jump box can power your phones, cameras, tablets etc.
【10 Intelligent Secure Protection & Stable Operation】: Our car jump starter have 10 protection systems (reverse polarity, reverse charge, over discharge, reverse connection, short circuit, over charge, over current, over heat, spark resistance). High Power jump pack for car battery ensure your safety during using and the jump pack can work in -22°F ~ 140°F, even in any extreme weather.
【2.2 pounds portable jump starter】: This upgraded battery jump starter weighs only 2.2 pounds and measures 6.61 x 3.37 x 1.7 inches, about the size of a pack of paper. You can easily put it in your bag, or anywhere in your car, without taking up any space. And with a protective case to avoid being worn and damaged.
NOTE: To ensure safety, High Power smart clamp had no output until it was correct connected to the car battery. If you have to detect the current, please connect the car battery.
【Will You Get】:
High Power Jump Starter x 1, Smart Jumper Cables x 1,USB-A to C Cable x 1(Without adapter), Carrying Case x 1, User Manua l x 1, 24 Months Warranty x1. if you have any questions,Please feel free to contact our Customer Service.(PS: AC adapter not included in the package)
$49.99
✅ Energy saving + magnetic retention + low standby, three major advantages = peace of mind and money saving
Even beginners can install it! Fully compatible with 12V/24V, it can handle all vehicle models in just a few minutes
Whether it's a family car, SUV or truck, once you put on the gloves, you can complete the installation in just a few steps. There's no need to spend money on an auto repair shop anymore. Doing it yourself saves both time and money.
⚡ Intelligent power-off, prolongs battery life from the source
Clear circuit design, intelligent detection of leakage/undercurrent risks, and automatic cutting off of potential hazard circuits. No matter how long you park, you don't have to worry about not starting the car, and the battery life will be directly extended!
Magnetic hold RF switch instruction
Product specification and characteristics
1.Operating voltage range: 6-30VDC
2. Adaptive 12V vehicle system and 24V Vehicle System
3.Automatic alarm of defective threshold and automatic battery disconnect
4. Frequency 433.92 Mhz, matching self-locking mode
5. Indicator display (ON and OFF)
6.700uA ultra-low standby power consumption
7.Driving process and ignition error trigger protection
Product parameters
1. Operating temperature -20 degrees-+ 100.
2. Switch rated current 250A
3. Switching instantaneous current 500A
4. Loss protection threshold 11.8 V+-0.2V/23V+-0.2V
5. Loss of power delay 60 seconds alarm 120 seconds automatic disconnect
6. Standby current 700uA
Notes:
1. The working voltage range of remote control and equipment can be normal pairing .
2. The working voltage range of manual button ON/OFF can be connected and disconnected equipment.
3.Supply voltage less than 6V or more than 3V, the equipment automatically shuts down and disconnects.
4.Power supply voltage below the protection threshold voltage (11.8 V/23.2 V) for 60 seconds alarm prompt, 120 seconds to automatically disconnect the device to protect the battery.
5.If the voltage is higher than 13.3 V (12V system)/26.2 V (24V system) , the RF remote control will fail to prevent the remote control button from accidentally touching the remote control during driving, which will lead to power failure.
6.The voltage range is 6-18V and the self-identification is 12V vehicle system, which works in response to the 12V system threshold。
7.Voltage Range in 18-30V self-identification for the 24V vehicle system, response to the 24V system threshold work
8.When the battery voltage is relatively high, the system enters the trip-triggered protection state.
9.When the battery voltage is relatively low, the system enters the protection state of ignition misfiring.
Remote control matching instructions.
WIRELESS REMOTE CONTROL BATTERY RELAY SWITCH 🔌—Stop Battery Drain. Start Your Car Remotely.🔋
Tired of a dead battery? 😩
Coming back to a car that won't start is frustrating and expensive. This switch is the simple, reliable solution.
How It Makes Your Life Easier ✨
Start your engine from up to 30m away. Warm up your car in winter and cool it down in summer. Step into a comfortable cabin.
🪫 Anti-Drain Protection
It physically cuts off power when your vehicle is parked, stopping parasitic drain from alarms or old electronics. Your battery stays charged for weeks.
🚫 Added Anti-Theft Security
Remotely disable the engine start. An effective deterrent that adds peace of mind for street parking.
🔌 Easy DIY Installation
No specialized tools or mechanics needed. Connect directly to your battery terminals. Most installations take under 15 minutes.
Ultimate Portability & Convenience 🎒
Super Easy Installation 🔧
Perfect For These Drivers 👥
-
Frequent Travelers: If you leave your car parked for weeks during business trips or vacations—BatteryGuard keeps the battery charged.
-
Security-Minded Owners: Anyone who parks on the street overnight or in high-crime areas—adds a reliable anti-theft barrier.
-
Classic Car/RV Enthusiasts: Vintage cars and RVs are prone to battery drain—protect your valuable ride.
-
Everyday Drivers: Avoid the frustration of dead batteries on cold winter mornings or hot summer afternoons.
Ideal For Car Mods 🚗💨
Standout Features That Matter ✨
Protect Your Battery & Car Today! 🛒
Looking for a comprehensive set of tools to handle all your car maintenance and repair needs? Our Professional Hose Clamp Kit is perfect for DIY car enthusiasts and professional mechanics alike!
Why Choose This Car Repair Tool Kit?
✔️ Complete Set for Automotive Work: Includes disconnecting pliers, crimping pliers, cutting pliers, and wire strippers — all you need to tackle wiring, electrical repairs, and more!
✔️ Built for Durability & Precision: Crafted from high-quality materials to withstand heavy use in automotive environments.
✔️ Ergonomic & User-Friendly: Comfortable grip designs make lengthy repairs easier, reducing fatigue.
✔️ Portable & Compact: Easy to store and carry, so you can work efficiently anywhere — garage, driveway, or workshop.
Perfect For:
- Electrical wiring repairs in cars
- Battery and cable maintenance
- Removing and installing connectors
- General troubleshooting and repairs
Material:carbon steel
- Choosing a selection results in a full page refresh.
- Opens in a new window.